29
2. Select the network conguration mode. It may take a while to switch
between the two modes.
• EZ pair mode (Default): Quick pair devices. You can set all devices to this
mode, and then add devices in batches on your phone.
• AP pair mode: If you would like to pair one specic device during many
devices. Please refer to FAQ 6.4 to congure network in this mode.
3. Open your APP.
4. Login with an existing account. If you are a new user, create an account
rst.
5. Please click the '+' button at the top right corner of the App to add devices.
6. Select 'Thermostat' in "Small Home Appliances" list to add manually.
←
←
To Next Page
Loading...