2
1. Place the main unit on a horizontal surface and install
the plastic food bowl;
2. Place the stainless steel inner bowl in the plastic
bowl;
3. After confirming that the bucket is installed in place,
lock the bucket lock;
- Scenario 1: The bucket already contains pet food.
Please place the bucket on the main unit according to
the correct orientation, press the lock button to unlock
the device, then long press the manual feeding button
for 3 seconds, the screen will show “----", the main
unit will start the bucket installation auxiliary function
automatically. In this process of function operation,
please keep the bucket in a right orientation with your
hand and wait for the accurate installation of the bucket
- Scenario 2: If there is no food in the barrel, but
still cannot be installed in place. You can repeat the
operation in Scenario 1, or please ensure the bucket in
the correct installation position, and at the same time,
turn the silicone rotor blade to let the bucket installed
in place
4. If the bucket is empty, please fill the bucket with pet
food;
5. Put the desiccant into the desiccant box, and cover
the top cover after adding the food to the bucket to
complete the installation
Installation
Pls scan the QR code to
view the installation video.
Display“----”
Unlock
Lock
To Next Page
Loading...