EasyManua.ls Logo

Oxygen 3-8-1000-0 - Timer Settings (2 H, 4 H, 8 H); Dip Switch Settings for Light

Oxygen 3-8-1000-0
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E. " , and " buttons:
Pressing the timer buttons will automatically turn fan off after
2, 4, or 8 hours.
Please note that the timer buttons is active only when the fan
speeds turn on. the light is not included.
You can cancel the timer by pressing button and re-start
the fan speed.
F. "DIM" and "ON/OFF" dip switch: (Fig. 2)
The "DIM" selection is the light dimmable selection and is to
be used with all bulbs execpt for CFL bulbs. The "ON/OFF"
selection is the light on only (no dimmable function) and is to
be used with CFL and LED bulbs as CFL bulbs cannot be
dimmed properly.
NOTE: The distance between the transmitter and receiver
should not be greater than 30 feet. For best performance, make
sure the Black Antenna on the end of the receiver unit remains
extended and not tangled with any of the electrical wires.