Ozark Trail W947.REC - User Manual

To Next Page

ASSEMBLY INSTRUCTIONS

MODEL W947.REC, 2P Hiker Tent

Spread out tent. Pull oor out evenly and tightly and stake to the

ground. Hammer stakes in at a 45 degree angle.

Flex poles and insert into grommets.

For additional set up help, please refer to our Assembly Video on Walmart.com.

Verify Package contents

DESCRIPTION PART NO. QTYNO.

A1001

PIN STAKE

10Steel Stake

Guy Rope

Ridge Pole

Complete Frame

Main Pole W947RM

W947RR

W947RST

Step 1 Step 3Step 2

SAFETY WARNING

EVERYONE WHO USES THIS SHELTER SHOULD READ THIS AND BECOME

FAMILIAR WITH ALL SAFETY WARNINGS AND PRECAUTIONS FOR SAFE USE.

DANGER

PROTECT YOUR CHILDREN

•DO NOT leave children unattended inside a

shelter

or in camp.

•DO NOT allow children to assemble a

shelter

•DO NOT allow children to enter or exit a shelter except through the door.

•DO NOT allow children to remain in a closed-up tent on hot days.

Your failure to follow this warning will cause death, serious injury, or

permanent disability to your children.

DANGER

CARBON MONOXIDE GAS WILL KILL YOU

Stoves, heaters, grills, lanterns, candles, and other fuel-burning devices

that burn propane, natural gas, charcoal, kerosene, coal, or other fuels

produce a toxic gas called carbon monoxide. Because carbon monoxide

gas is invisible, odorless, and colorless, a dangerous level of carbon

monoxide gas can accumulate in a shelter which cannot be detected

sight, smell or taste. For these reasons:

•DO NOT use matches, lighters, stoves, heaters, grills, lanterns, candles,

cooking equipment, or other fuel-burning devices inside or near a shelter.

•DO NOT build res inside or near a

shelter

•DO NOT leave campres unattended.

Your failure to follow this warning will cause death, serious injury, or

permanent disability to you or others.

Extend the poles and lay the two longer poles across the tent forming an X.

REPLACEMENT PARTS

If you have questions or need to order a part, call 1-800-325-4121

or send an email to contactus@wenzelco.com. Have your model

number or part number ready when you call.

Please do NOT

return product

to store. Call us

at1-800-325-4121

for assistance.

WARNING

FLAMMABILITY WARNING KEEP ALL FLAME AND HEAT SOURCES AWAY

FROM THIS SHELTER FABRIC. This shelter is made with ame resistant

fabric which meets CPAI-84 specication. IT IS NOT FIREPROOF. The fabric

will burn if left in continuous contact with any ame source. The application

of any foreign substance to the shelter fabric may render the ame-resistant

properties ineective. Your failure to follow this warning will cause death,

serious injury, or permanent disability to you or others.

DO NOT...

1. Do not use other than recommended water repellent compounds

on your shelter.

2. Do not spray the shelter with insecticide.

3. Do not store shelter on concrete oor.

DO...

1. Always extinguish campre before leaving area.

Exercise care when using electricity and lighting in and near shelter.

Make certain your shelter is properly ventilated in all weather conditions.

In extreme weather conditions, snow could obstruct airow and cause

asphyxiation unless cleared frequently.

4. Anchor your shelter securely to provide additional security from

changing climatic conditions.

angle.

Need help?

Do you have a question about the Ozark Trail W947.REC and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
1. Package Contents
2. Material and Safety Information
Usage Features
Maintenance Features

This document provides assembly instructions and a description for the Ozark Trail Model W947.REC, a 2P Hiker Tent.

Function Description

The Ozark Trail Model W947.REC is a two-person hiker tent designed for outdoor use. It provides shelter and a sleeping area for two individuals. The tent features a main pole and a ridge pole for structural support, and it includes a rainfly for weather protection. The design emphasizes ease of assembly and portability, making it suitable for hiking and camping.

Important Technical Specifications

Package Contents

The tent package includes the following components:

Main Pole (A): W947RM, Quantity: 2
Ridge Pole (B): W947RR, Quantity: 1
Complete Frame: W947RST, Quantity: 1 (This likely refers to the assembled pole structure or a bag containing all poles)
Guy Rope: A1001, Quantity: 4
Steel Stake: PIN STAKE, Quantity: 10

Material and Safety Information

Flammability Warning: The tent fabric is made with flame-resistant fabric which meets CPAI-84 specification. It is NOT FIREPROOF. The fabric will burn if left in continuous contact with any flame source.
Carbon Monoxide Gas Warning: This tent, like other fuel-burning devices, can produce carbon monoxide, which is odorless, colorless, and dangerous. It is crucial to avoid using fuel-burning devices inside or near the tent.
Ventilation: The tent design includes features for ventilation, such as unzipping zippers on both vestibules and unclipping the fly to the ridge pole (B) to allow air to escape.

Usage Features

Assembly Instructions

The assembly process is broken down into seven steps:

Step 1: Spread out tent.

Lay the tent flat on the ground. Hammer stakes into all 45-degree angle loops.

Step 2: Extend poles.

Extend the poles and lay the two longer poles across the tent forming an X.

Step 3: Flex poles and insert into grommets.

Flex the poles and insert their ends into the grommets located at the corners of the tent.

Step 4: Clip the hooks to the poles.

Attach the tent body's hooks to the main poles.

Step 5: Slide remaining pole (B) thru yellow sleeve and OVER the other poles.

Slide the ridge pole (B) through the yellow sleeve on the tent body and over the main poles. Flex the pole and place it into the grommet.

Step 6: Place rainfly over tent.

Place the rainfly over the tent so the yellow webbing on the fly lines up with the yellow webbing at the base of the tent. Secure the fly to the poles using Velcro. Connect the buckles.

Step 7: Stake down the vestibules and guy ropes.

Stake down the vestibules. Use the slider to adjust the guy rope tension.

Folding Instructions

To pack up the tent:

Spread shelter out flat.
Fold into equal parts toward the center of the shelter to distribute the bulk.
The width of the folded shelter (dimension A) should be the length of the pole bag.
Lay pole bag, stakes and accessories on top of folded shelter at the end opposite the door.
Tightly roll shelter around pole bag toward the door, allowing air to escape.
Secure with ties and place in carry bag.

Helpful Tip for Star-Gazing

For star-gazing, unzip zippers on both vestibules and unclip the fly. Roll the fly to the Ridge pole (B) and secure with toggles.

Maintenance Features

General Safety Precautions

Carbon Monoxide Safety:
- Do NOT use matches, lighters, stoves, heaters, grills, lanterns, candles, cooking equipment, or other fuel-burning devices inside or near a shelter.
- Do NOT build fires inside or near a shelter.
- Do NOT leave campfires unattended.
- Your failure to follow this warning will cause death, serious injury, or permanent disability to you or others.
Child Protection:
- Do NOT leave children unattended inside a shelter or in camp.
- Do NOT allow children to assemble a shelter.
- Do NOT allow children to enter or exit a shelter except through the door.
- Do NOT allow children to remain in a closed-up tent on hot days.
- Your failure to follow this warning will cause death, serious injury, or permanent disability to your children.

Usage Recommendations

Always extinguish campfire before leaving area.
Exercise care when using electricity and lighting in and near shelter.
Make certain your shelter is properly ventilated in all weather conditions. In extreme weather conditions, snow could obstruct airflow and cause asphyxiation unless cleared frequently.
Anchor your shelter securely to provide additional security from changing climatic conditions.

Customer Support

For additional set up help, refer to the Assembly Video on Walmart.com.
If you have questions or need to order a part, call 1-800-325-4121 or send an email to contactus@wenzelco.com. Have your model number or part number ready when you call.