www.OZCOBuildingProducts.com
Star 2⅜″ODItem #: 56623
OrnamentalHardware-InstallationGuide
Steps:
1. Position star in desired location
2. Check to make sure that screw is not too long for your installation location
3. Tighten screw
Use and Care: This hardware may not be suitable for every situation or installation application. A design
professional should be consulted to ensure the specic installation application meets local building code
requirements.
If hardware becomes dirty clean with soap and water. Avoid abrasions to surface and touch up any scrapes
with paint. Rinse with fresh water if hardware comes in contact with ice salt or salt water.
To Next Page
Loading...