EasyManua.ls Logo

Ozito POWER X CHANGE PXCPPS-018 - Page 13

Ozito POWER X CHANGE PXCPPS-018
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquiries@ozito.com.au
SPARE PARTS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household waste
but in an environmentally friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landll and raw materials. Reuse of recycled
material decreases pollution in the environment. Please recycle packaging where
facilities exist. Check with your local council authority for recycling advice.
WARNING: BEFORE CLEANING YOUR POLE HEDGE
TRIMMER OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, ENSURE THE TOOL IS OFF & THE BATTERY
REMOVED.
When not in use, the Hedge Trimmer Head should be stored in a dry, frost
free location not within the reach of children.
If the enclosure of the Hedge Trimmer Head requires cleaning do not use
solvents but a moist cloth only.
There are no user serviceable parts in the Hedge Trimmer Head; if a fault is
suspected, please contact Ozito customer service.
The blade rail should be cleaned and treated with light machine oil or spray
lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts
for a longer period of time it is recommended that the blade rail also be
treated with spray lubricant at regular intervals during operation.
Wear eye, ear and head protection
Read instruction manual
Do not use in the rain or leave the pole hedge trimmer outdoors
while raining.
Regulator compliance mark
Wear safety gloves
Keep bystanders away
10 m
102
Maintain a minimum clearance of 10 m from current-carrying lines.
Life-threatening danger from electric shock.
Sound pressure levelWear safety boots
Keep hands away from blade
-
¹
Hertz
Hz
DESCRIPTION OF SYMBOLS

Related product manuals