Starting The Lawnmower
26
STEP 6
Push the start button. DO NOT keep the
button pressed for longer than 5 seconds.
Once the lawn mower starts, release the start
button. If the lawn mower fails to start after
5 seconds, release the start button, wait 30
seconds then try again.
Allow to run for 15 seconds, then slowly move
the choke lever back towards the run position.
STEP 7
Warm Electric Start Procedure
STEP 1
NOTE - You MUST ensure the
mower has the correct oil and fuel level
before operation.
!
STEP 2
Pull the Operator Presence Control (OPC)
lever towards the main handle.
Make sure the blade is free of long grass and
the cutting height is set to maximum.
To Next Page
Loading...
