PacComm TINY-2 - Page 111

B
[CR]
disconnects
you
from
PMS.
H [CR]
or ? [CR]
displays
this
help
file.
J
[CR]
displays
a
list
of
callsigns
heard
(optional
date/time)
Kn
[CR]
deletes
message
n
(only
to/from
your
callsign).
KM
[CR]
deletes
all
READ
messages
addressed
to
your
call.
L
f
|
lists
the
10
latest
messages.
M
[CR]
lists
the
10
latest
messages
to/from
your
callsign
fn
[CR]
reads
message
number
n.
S
(callsign)
[CR]
begins
a
message
addressed
to
(callsign).
Subject:
max
28 characters
ending
with
[CR].
Text:
End
each
line
with
[CR].
End
message
by
typing
/ex
CR}
or CTRL-Z
[CR]
at
the beginning
of a new
line.
Rn
[CR]
Sends
a
reply
to
message
n
prompting
only
for
text.
V(ersion)
+
[CR]
displays
the
software
version
of the
PMS
system.
The help message display is sent in response to the Help or ?
command from a PMS user.
Message erased
This message is sent or displayed in response to the Kill com-
mand which originates from either the Sysop or user.
Message marked for forwarding
Response to the Sysop command to mark a message for reverse
forwarding.
Message forwarding reset
Response to the sysop command to ’unforward’ a message
previously marked for forwarding.
Message has been sent to the printer queue
Response to the PPRint Sysop command to print a PMS mes-
sage on the packet controller printer port.
Message saved as Msg # n
Response sent or displayed after the completion of Sending’ a
message by either the Sysop or user.
nnnnn Bytes free, Next message Number n
Displayed at the end of the LIST display
104 Operating Manual, 4th Ed. © PacComm, 1990