- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL
MEGA-T300 Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
Part no. Descripon Images
Mechanical-base
M3-FEET
MEGA-T300 support feet (4/set)
T3-M-028
MEGA-T300 lifting handles (2/set)
T3-M-027
MEGA-T300 casting base
Part no. Descripon Images
Mechanical-Hood
T3-M-029
MEGA-T300 Control panel fabricated cover
T3-M-033
MEGA-T300 Cutting chamber hood
32
To Next Page
Loading...