- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL
MEGA-T300 Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
1.0 Product Description
The MEGA-T300 is a manual wheel feed
or table feed abrasive cut-off machine for
cutting materials ranging from soft
aluminum metals to hardened tool steels.
It is ideal for the metallographic
laboratory, as well as for small industrial
or production applications.
The MEGA-T300 is very robust and
durable with its cast aluminum alloy and
stainless steel construction. Featuring a
corrosion-free T-slot table, the MEGA-
T300 is a very versatile table feed bench
top model metallographic cutter.
1.1 General Description
1
Control
panel
Manual
wheel
feed
Cutting
chamber
Table wheel
feed
T-slot table
Safety
Lock-out
Safety
Lock-out
Emergency
Stop
Blade
change
locking peg
To Next Page
Loading...