Maximum comfort is usually obtained when the handlebar height is
equal to the height of the seat. You may wish to try different heights
to find the most comfortable position.
Ensure that the handlebar stem does not extend beyond the minimum insertion
mark. Failure to do this may cause serious bodily injury or damage to the bicycle.
Ensure both the Stem Wedge Bolt and the Handlebar Binder Bolt are tightened
securely. Failure to do this may cause loss of steering control. (Refer to p. 59 on
how to adjust handlebars).
Stem Wedge Bolt
Maximum Height/
Minimum Insertion
Mark
Handlebar Binder Bolt
Exceeds 2 1/2”
(64mm)
6
11/99.bikemanual 11/24/99 3:50 PM Page 13
To Next Page
Loading...