Need help?Do you have a question about the Pado FDE-300W and is the answer not in the manual?
General| Type | Smart Lock |
|---|---|
| Material | Zinc Alloy |
| Power Supply | 4 AA Batteries |
| Lock Type | Mortise |
| Operation Voltage | 6V |
| Unlocking Methods | Fingerprint, PIN Code, RFID Card, Mechanical Key |
| Fingerprint Capacity | 100 |
| PIN Code Capacity | 100 |
| RFID Card Capacity | 100 |
| Auto Lock | Yes |
| Anti-theft Alarm | Yes |
| Weight | 2.5 kg |
| Operating Humidity | 20% to 90% RH |
Registering an account is required for app usage, via phone number or email address.
Follow these steps to log into the application after creating an account.
Steps to register for the first time using the application via phone or email.
Registering the FDE-300W digital lock after initial app login.
Steps to register additional digital locks for the FDE-300W.
Steps to associate a Gateway with the FDE-300W lock.
Register numeric passwords in various modes like Permanent, Programmed, or One-time.
Create a random numeric password with no validity period.
Create a random numeric password with a defined validity period.
Create a random numeric password usable only once.
Create a password to delete all registered access keys from the lock.
Create a custom password, configurable as permanent or with a validity period.
Create a password with periodically renewed validity.
View registered passwords and manage their exclusion from the lock.
Exclude a single numeric password by sliding it to the left.
Exclude all registered numeric passwords at once.
Register access cards by providing identification, mode, and validity dates.
View registered cards and manage their exclusion from the lock.
Exclude a single access card by sliding it to the left.
Exclude all registered access cards at once.
Register fingerprints by providing identification, mode, and validity dates.
View registered fingerprints and manage their exclusion from the lock.
Exclude a single fingerprint by sliding it to the left.
Exclude all registered fingerprints at once.
Send electronic access keys (eKeys) remotely without physical contact.
Create an eKey with a random password and defined validity period.
Create an eKey with a random password without a validity period.
Create an eKey with a random password usable only once.
Create an eKey with a periodically renewed validity period.
Track all access events, including method and time of operation.
Learn how to open the lock using different methods.
Open the lock by entering and confirming a numeric password.
Open the lock by positioning a registered fingerprint on the reader.
Open the lock by bringing the RFID card close to the indicated area.
Understand manual and automatic closing modes for the lock.
Disable external handle access, except via the app, using this mode.
Access and manage various lock settings via the application.
View essential lock data like battery level and administrator password.
Enable or disable remote lock opening via the internet.
Configure the lock to automatically close after a predefined time.
Disable automatic closing and control lock closure manually.
Control the lock's sound by enabling or disabling device sounds.
Automatically sync the lock's date and time with the control device.
Perform self-diagnosis to check for any issues with the digital lock.
Synchronize out-of-date access control information by forcing a data update.
Periodically check for and install software updates for the digital lock.
Disconnect the digital lock from its account by excluding it from the app.
Manage configured gateways and associated devices through the app.
Associate new digital locks with an already configured gateway.
Remove a gateway from its account and associated digital locks.
Check for and apply software updates for the gateway device.
Connect an external battery to the micro-USB port for emergency power.
Open the lock using mechanical keys if batteries fail or user issues occur.
Access the app's help section for troubleshooting and FAQs.
To Next Page
