4. Enter pakedge for user and pakedgep for password and you should now be able to access the
web interface.
5. For an explanation of features inside the web interface, please refer to the complete user’s
manual on the Dealer’s Portal on www.pakedge.com.
Product Features
1. Protect power sensitive equipment with the boot sequence feature: The P8 can be
configured to power on and turn off devices in a proper shutdown/startup sequence.
2. Remote power source management: In addition to scheduling power reboot events monthly,
weekly or daily, the P8 gives users the option to reboot equipment and turn on/off specific outlets
on the device.
3. Monitoring AC power consumptions: The P8 has the option to send warning messages when
the aggregated AC draw from a system crosses a pre-defined threshold.
4. Remote Control through email: Using emails, the P8 can be used to manage the systems’
outlets and devices when access to the LAN is not available. The user can send commands to the
P8 via emails such as rebooting or powering off specific outlets.
5. Auto-Ping and equipment reboot: If you connect a device to a specific outlet and provide the P8
with the IP address of the device, the P8 will ping the device every 15 seconds and if it does not
get a response, the device will be rebooted.
To Next Page
Loading...