Pakedge MS-1212 Quick Start Guide

77
Logging in through the network
You can log in to the switch’s interface using a web browser on a computer that’s
connected to the network.
To log in through the network:
1 Connect the managed switch to a power source. The PWR LED lights up and the
fans power on.
2 Connect the switch to the network or directly to the router, then connect your
computer to the same network.
3 Open the network router’s interface to find the DHCP table, then look for the
host name matching the model and MAC address of the switch and note the
corresponding IP address.
4 In a web browser, enter the IP address you took note of in step 3.
5 Enter the username and password. (The default username is admin and the
password is password.)

Pakedge MS-1212 Specifications

General

Brand	Pakedge
Model	MS-1212
Category	Switch
Language	English