Need help?Do you have a question about the Paladin Tools 1112 AM and is the answer not in the manual?
General| Brand | Paladin Tools |
|---|---|
| Model | 1112 AM |
| Category | Tools |
| Language | English |
Instructions for cutting wire or cable using the 1112 AM 12 stripper.
Steps for stripping wire and cable with the 1112 AM 12 stripper.
Instructions for cutting wire and cable with the 1116 Data SureStrip stripper.
Steps for stripping round wire and cable using the 1116 Data SureStrip.
Procedure for stripping flat satin telephone cable with the 1116 Data SureStrip.
Instructions for cutting wire using the 1113 & 1114 stripax Pro wire strippers.
Steps for stripping wire with the 1113 & 1114 stripax Pro wire strippers.
General guidance for operating the 1820 Series Cable Strippers/Slitters.
Procedure for replacing blades on the 1820 Series Cable Strippers/Slitters.
Steps for stripping coaxial cable using the 1240 Series CST Strippers.
Procedure for stripping coaxial cable with the 1255-1258 LC CST Coax Strippers.
General operating procedures for the 1300 Series Crimpers.
How to use the emergency release feature on the 1300 Series Crimpers.
Guidance on adjusting the ratchet strength for 1300 Series Crimpers.
General operating procedures for the 8000/CrimpALL Series Crimpers.
How to use the emergency release feature on the 8000/CrimpALL Series Crimpers.
Guidance on adjusting the ratchet strength for 8000/CrimpALL Series Crimpers.
Steps for crimping a cable assembly using the 1600 Series Crimpers.
How to use the emergency release feature on the 1600 Series Crimpers.
Guidance on adjusting ratchet gear settings for 1600 Series Crimpers.
Instructions on how to set the ratchet gear for optimal crimp performance.
How to determine if the 1555 SealTite Pro is set for the correct connector type.
Procedure for properly attaching the head of the 1555 SealTite Pro crimper.
How to adjust the lock nut and set the 1555 SealTite Pro for specific connectors.
Adjusting the setting screw and performing cable/connector assembly and crimping.
Steps for preparing cable and performing the crimping procedure.
Instructions for cutting and stripping telephone cable with 1530R/1540 tools.
Steps for crimping cable using the 1530R & 1540 All-in-One Pro Data/Phone Tools.
Procedure for cutting flat and round cables with 1556/1557 tools.
Steps for stripping flat satin and round UTP/STP cables using 1556/1557 tools.
Instructions for crimping modular plugs with 1556/1557 All-in-One Data/Phone Tools.
Further details on crimping modular plugs with 1556/1557 tools, including cavity locations.
Instructions for cutting and stripping telephone cable with 901014/901016 tools.
Steps for crimping cable using the 901014 & 901016 All-in-One Ultra Data/Phone Tools.
Procedure for installing blades into the 3590 Series SurePunch Pro Punchdown Tool.
Steps for attaching the light module to the 3590 Series SurePunch Pro Punchdown Tool.
Guide for battery installation, light operation, tool applications, and blade storage.
Procedure for terminating wires using the 3590 Series SurePunch Pro Punchdown Tool.
Procedure for installing blades into the 3570 Series SurePunch Punchdown Tools.
Instructions for cutting or punching down telephone wire with 3570 SurePunch Tools.
Guide on using the blade storage feature of the 3570 Series SurePunch Punchdown Tools.
General operating procedures for the 3526 Series Impact Punchdown Tools.
Instructions for preparing cable and shield for Hex-Crimp connectors.
Procedure for inserting cable and crimping the connector onto the cable.
Steps for preparing cable and flaring shield for SealTite F connectors.
Procedure for inserting cable and crimping the connector using a SealTite tool.
Steps for preparing cable and flaring shield for SealTite BNC connectors.
Procedure for inserting cable and crimping the connector using a SealTite Pro crimper.
Steps for preparing cable and flaring shield for SealTite RCA connectors.
Procedure for inserting cable and crimping the connector using a SealTite Pro crimper.
Steps for preparing coaxial cable with 2 or 3-level strips as per connector manufacturer.
Procedure for assembling coaxial connectors and crimping the ferrule to secure the cable.
Instructions for stripping telephone cable for 4, 6, 8, and 10-pin connectors.
Procedure for inserting telephone cable into connectors and crimping.
Instructions for stripping network cable and untwisting paired wires.
Procedure for configuring wire scheme and inserting into RJ45 plug.
Chart showing wire pairing for Token Ring, ISDN, TP-PMD, ATM, and T568A/B standards.
Diagrams showing EIA/TIA-568A, EIA/TIA-568B, and USOC wiring for RJ45 plugs and sockets.
To Next Page