EasyManua.ls Logo

paladin Bradco Extreme Duty Ground Shark Series User Manual

paladin Bradco Extreme Duty Ground Shark Series
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BRUSH CUTTER
Extreme Duty Ground Shark
TM
GSE66, GSE72, GS72 & GS78
12133 7-27-18-8
800-456-7100 I www.paladinattachments.com 503 Gay Street, Delhi, IA 52223, United States of America Copyright ©
SERIAL NUMBER: ___________________ Manual Number: OM828
Part Number: 75728
MODEL NUMBER: ___________________ Rev. 7
FOR
SKID STEER LOADERS
OPERATOR’S MANUAL
Question and Answer IconNeed help?

Do you have a question about the paladin Bradco Extreme Duty Ground Shark Series and is the answer not in the manual?

paladin Bradco Extreme Duty Ground Shark Series Specifications

General IconGeneral
ModelBradco Extreme Duty Ground Shark Series
CategoryBrush Cutter
Drive TypeHydraulic
Power RequirementVaries by model
ConstructionHeavy-duty steel
Warranty1 year limited warranty

Summary

Preface

General Comments

Introductory remarks about the Bradco product and the operator's manual.

Before Operation

Operator's primary responsibility for safety and understanding the manual.

Safety Alert Symbol

Definition and purpose of the safety alert symbol used in the manual.

Service

Guidance on using manufacturer replacement parts for service.

Sound and Vibration

Factors influencing sound and vibration levels for the attachment.

General Safety Precautions

Protect Against Flying Debris

Wear safety gear when operations cause dust or flying debris.

Lower or Support Raised Equipment

Never work under raised booms without proper support.

Use Care With Hydraulic Fluid Pressure

Precautions for handling hydraulic fluid under pressure.

Safety Statements

Safety Statements

Explanation of safety signal words and their meanings.

Read Manual Prior to Installation

Importance of reading manuals before installation, operation, or maintenance.

Read and Understand All Safety Statements

Adherence to safety decals, regulations, and good work practices.

Know Your Equipment

Understanding equipment capabilities and performing pre-operation checks.

General Safety Precautions

Do Not Modify Machine or Attachments

Modifications can weaken integrity; use genuine parts.

Safely Maintain and Repair Equipment

Safety practices for maintenance and repair.

Safely Operate Equipment

Guidelines for safe operation of the equipment.

California Proposition 65 Warning

Warning about potential chemical exposure.

Equipment Safety Precautions

Know Where Utilities Are

Be aware of overhead and underground utilities.

Exposure to Respirable Crystalline Silica Dust

Health risks from dust exposure during operation.

Remove Paint Before Welding or Heating

Safety measures for welding or heating painted materials.

End of Life Disposal

Proper procedures for disposing of the unit.

Operating the Attachment

Safety guidelines for operating the brush cutter.

Equipment Safety Precautions

Operating the Attachment

Operating precautions on slopes, terrain, and with operator alertness.

Transporting the Attachment

Safe procedures for transporting the attachment.

Maintaining the Attachment

Safety precautions for maintenance and repair.

Decals

Decal Placement

Diagram showing the location of all decals on the attachment.

General Information

Purpose of decals and importance of keeping them legible.

Decals

Danger! Rotating Blade

Warning about rotating blade hazards and necessary precautions.

Danger! Guard Missing

Warning against operating the unit with a missing guard.

Warning! High Pressure Fluid

Warning about high-pressure fluid hazards.

Warning! Before Leaving Operator's Seat

Safety steps before leaving the operator's seat.

Warning! Lift Limiting Chain

Requirement for proper installation of lift limiting chains.

Decals

Danger Stand Clear

Warning to keep clear of the operating area.

Made in USA

Indicates the country of origin.

Lift Point

Designated points for lifting the attachment.

Warning! Pinch Point

Warning about pinch point hazards.

Warning! Moving Parts

Warning about moving parts and ensuring rotation has stopped.

Preoperation

General Information

Overview of attachment operation and requirements for skid steer loader.

Nomenclature

Diagram identifying the various components of the brush cutter.

Installation Instructions

General Information

Instructions for mounting the brush cutter onto a skid steer loader.

Attaching to Prime Mover

Step-by-step guide for attaching the brush cutter to the loader.

Detaching from Prime Mover

Procedure for safely removing the brush cutter from the loader.

Operating Instructions

Intended Use

Description of the brush cutter's designed purpose and limitations.

General Information

Information on attachment hook-up and skid steer controls.

Operating Tips - GSE Series (20-34 GPM Cutters)

Tips for operating GSE series cutters, including blade rotation.

Operating Tips - GS Series (30-45 GPM Cutters)

Tips for operating GS series cutters, including blade rotation and pressure.

Operating Instructions

Before Leaving the Operator's Seat

Critical steps before exiting the operator's seat.

Rotating Blade Hazard

Dangers associated with rotating blades and necessary precautions.

Lift Limiting Chain

Importance of proper lift limiting chain installation.

Cutting Operation

Detailed steps for performing cutting operations.

Cutting Large Brush and Small Trees Up To 7" (178mm) in Diameter

Specific procedure for cutting large brush and trees.

Operating Instructions

When Cutting Large Brush and Small Trees

Detailed steps for cutting large brush and trees.

Tooth Kit Operation

Instructions for using the optional tooth kit for stump grinding.

Avoid Stalling Brush Cutter

Preventing hydraulic system overheating and stalling.

To Restart Blade Rotation

Procedure to restart blade rotation after stalling.

Repeated Stalling of Rotating Blades

Troubleshooting and correcting repeated blade stalling.

Operating Instructions

Troubleshooting Operating Conditions

Common issues causing stalling and their solutions.

Operating Instructions

Storage

Procedure for proper storage of the brush cutter.

Additional Precautions for Long Term Storage

Extra steps for extended storage periods.

Removing from Storage

Steps for taking the brush cutter out of storage.

Lift Points

Identification of safe lifting points and precautions.

Operating Instructions

Tie Down Points

Identification of secure tie-down points for transport.

Transporting

Guidelines for safely transporting the attachment.

Lubrication

General Information

Importance of proper lubrication for efficiency and longevity.

Weekly

Procedure for weekly checking of drive bearing housing oil level.

GSE Series (20-34 GPM) Cutters

Lubrication check and fill procedures for GSE series.

GS Series (30-45 GPM) Cutters

Lubrication check and fill procedures for GS series.

Maintenance

General Information

Key role of regular maintenance for equipment life and safety.

Escaping Fluid Under Pressure

Hazards of high-pressure fluid leaks and safety precautions.

Maintenance

Replacing Blades (GSE Series Cutters Only - 20-34 GPM)

Procedure for removing and installing blades on GSE series cutters.

Maintenance

Replacing Blades (GS Series Cutters Only - 30-45 GPM)

Procedure for replacing, flipping, or sharpening blades on GS series.

Maintenance

Replacing Hydraulic Motor / Control Valve

Steps for replacing the hydraulic motor or control valve assembly.

Maintenance

Replacing Drive Bearing Housing (GS Series Cutters Only - 30-45 GPM)

Procedure for replacing the drive bearing housing on GS series cutters.

Maintenance

Replacing Drive Bearing Housing

Detailed steps for removing and installing the drive bearing housing.

Maintenance

Changing Oil in Drive Bearing Housing

Procedure for draining and refilling the drive bearing housing oil.

Troubleshooting

Excessive Vibration

Causes and remedies for excessive vibration in the cutter.

Cutter Stalls Too Easily or Loss of Power

Troubleshooting causes for cutter stalling and power loss.

Stump Grinding Stalls Cutter or Takes Excessive Amount of Time to Complete

Diagnosing and fixing issues with stump grinding performance.

Bolt Torque Specifications

General Torque Specification Tables

Charts for determining bolt torque specifications.

SAE Bolt Torque Specifications

Torque values for SAE hardware.

Metric Bolt Torque Specifications

Torque values for metric hardware.

Specifications

GSE Series (20-34 GPM Cutters)

Technical specifications for GSE series brush cutters.

GS Series (30-45 GPM Cutters)

Technical specifications for GS series brush cutters.

Parts

Service Department

Contact information for parts and service.

Warranty

Information on warranty registration and procedures.