SETTING UP
INSERTING THE SIM CARD AND BATTERY
8
1
CHAPTER
2 If the battery is installed, remove it.
Slide your finger under the left side of
the battery (nearest the stylus) and lift
up to remove.
3 With the metal contacts facing the
battery compartment, slide the SIM
card into the cutout in the lower-right
corner of the compartment until you
feel it snap into place. Align the notches
to make sure you have the card oriented
correctly.
4 Align the metal contacts on the battery
with the contacts inside the battery
compartment, insert the battery into the
compartment at a 45-degree angle, and
then press it into place.
5 Slide the battery door back into place.
Your Treo 750 screen turns on. Wait for
the progress bar to fill and the Windows
Mobile
®
screen to appear.
Battery door
release button
Notch
Battery
contacts
Compartment
contacts
To Next Page
Loading...
