SYNCHRONIZING INFORMATION
SETTING UP WIRELESS SYNCHRONIZATION
79
4
CHAPTER
updated on your Treo 750 or the server,
or at certain intervals.
1 Press Start and select Programs.
2 Select ActiveSync .
3 Press Menu (right action key)
and select Schedule.
4 Set any of the following options:
Peak times: Sets the frequency for
high-traffic time periods such as when
you are at work or when email volume
is high.
Off-peak times: Sets the frequency for
low-traffic time periods such as late at
night.
Use above settings while roaming:
Sets the frequency while you are
roaming outside the Cingular network.
You should keep this box checked to
ensure that wireless sync works
properly.
Send outgoing items immediately:
Sets whether items are sent as soon as
you select Send in the Inbox application,
or whether they are held until the next
synchronization.
5 Press OK .
Initiating a wireless sync manually
If you want to control exactly when a
wireless sync takes place, or if it is not OK
to store your corporate email password on
your Treo 750, you can initiate sync
manually.
1 To set up manual sync, follow the
preceding procedure, Setting the
synchronization schedule. In the Peak
times and Off-peak times lists, select
Manual.
2 To initiate a manual sync, press Start
and select Programs.
3 Select ActiveSync .
4 Press Sync (left action key).
To Next Page
Loading...
