Palram CANOPIA AQUILA 3x5 - User Manual

A member of Palram Industries Ltd.
www.canopia.com
Please read these instructions carefully before starting assembly.
Keep these instructions in a safe place for future reference.
IMPORTANT!
HOW TO
ASSEMBLE
600482_23.04_MV-7.2
R
E
C
Y
C
L
A
B
L
E
REGISTERED
DESIGN
E
N
1
4
9
6
3
:
2
0
0
6
AQUILA
™
3x5 / 1x1.5

Summary

Tools and Equipment

Assembly Process and Care

Safety Precautions

Crucial safety guidelines to follow during assembly and product handling.

Preparation and Assembly Overview

Parts List

Assembly Steps 1-4

Step 1-2: Profile and Bracket Prep

Preparing the main profile and attaching brackets with seals.

Step 3-4: Wall Marking and Drilling

Measuring and drilling pilot holes for bracket installation.

Assembly Steps 5-8

Step 5-6: Mounting Supports

Mounting support arms to the wall brackets and securing them.

Step 7-8: Front Profile Installation

Installing the front profile and its associated seals.

Assembly Steps 9-12

Step 9-10: Install Panel and Seals

Step 11-12: Attach Front Supports

Assembly Steps 13-14

Step 13: Install End Caps

Step 14: Finalize Front Seal

Limited Warranty

Warranty Terms and Conditions

Palram CANOPIA AQUILA 3x5 Specifications