Need help?Do you have a question about the Panametrics AquaTrans AT868 and is the answer not in the manual?
General| Technology | Ultrasonic |
|---|---|
| Repeatability | ±0.1% of reading |
| Sensor Material | Stainless Steel |
| Measurement Principle | Ultrasonic |
| Accuracy | ±1% of reading |
| Power Supply | 12 to 28 VDC |
| Output Signal | 4-20 mA, HART |
| Temperature Range | -40 to 140°F (-40 to 60°C) |
| Enclosure Rating | IP66/NEMA 4X |
| Fluid Types | Liquids |
Guidelines for selecting suitable locations for the electronics enclosure and flowcell/transducers.
Instructions for making all necessary electrical connections to the AT868 flow transmitter.
Inputting parameters for transducers and pipe geometry for accurate flow measurement.
Configuring signal limits, response times, and advanced meter features.
Configuring error handling and output signals for measurements.
Procedure for calibrating and testing the transmitter's analog output signals.
Verifying the accuracy and linearity of the analog output signals.
Addresses issues related to insufficient ultrasonic signal strength.
Details problems with inaccurate sound speed measurements.
Explains errors related to flow velocity exceeding programmed limits.
Accessing and viewing system parameters for troubleshooting.
Guidance on diagnosing and resolving issues related to the flowcell.
Troubleshooting steps for issues with ultrasonic transducers.
Overall technical characteristics and capabilities of the AT868 flow transmitter.
Detailed technical specifications for wetted and clamp-on transducers.
Using PanaView software to modify meter settings and data.
Performing remote programming tasks via PanaView software.
To Next Page
