Base unit: M N a *
2 T
o search for the name, enter the first
characters (up to 4) in uppercase (page 32).
3 MOKN
4 MbN: Scroll through the phonebook if
necessary.
Searching by group
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MFN
Base unit: M N
2 MG
ROUPN
3 MbN: Select the group you want to search. a
MSELECTN
R If you select “All groups”, the unit ends
the group search.
4 MbN: Select the desired entry.
Editing entries
Handset
1 F
ind the desired entry (page 33).
2 MMENUN a MbN: “Edit” a MSELECTN
3 Edit the name if necessary. a MOKN
4 Edit the phone number if necessary. a MOKN
5 MbN: Select the desired group (page 33). a
MSELECTN 2 times
6 MOFFN
Base unit
1 F
ind the desired entry (page 33).
2 MEDITN
3 Edit the name if necessary. a MOKN
4 Edit the phone number if necessary. a MOKN
5 MbN: Select the desired group (page 33). a
MSELECTN 2 times
6 MEXITN
Erasing entries
Erasing an entry
Handset
1 F
ind the desired entry (page 33).
2 MMENUN a MbN: “Erase” a MSELECTN
3 MbN:
“Yes” a MSELECTN
4 MOFFN
Base unit
1 F
ind the desired entry (page 33).
2 MERASEN a MbN: “Yes” a MSELECTN
3 MEXITN
Erasing all entries in a group
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MFN
a MM
ENUN
Base unit: M
N a MM
ENUN
2 MbN: “Erase all” a MSELECTN
3 MbN: Select the desired group. a MSELECTN
4 MbN: “Yes” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Chain dial
T
his feature allows you to dial phone numbers in
the phonebook while you are on a call. This
feature can be used, for example, to dial a calling
card access number or bank account PIN that you
have stored in the phonebook, without having to
dial manually.
Handset / Base unit
1 P
roceed with the operation for your unit.
During an outside call:
Handset: MFN
Base unit: M N
2 MbN:
Select the desired entry.
3 Press MCALLN to dial the number.
Note:
R When storing a calling card access number and
your PIN in the phonebook as one phonebook
entry, press MDN (Pause) on the handset or
MPAUSEN on the base unit to add pauses after
the number and PIN as necessary (page 22, 27).
R If you have rotary/pulse service, you need to
press * (TONE) before pressing MFN
on
t
he handset or M
N
on the base unit in step 1
to change the dialing mode temporarily to tone.
When adding entries to the phonebook, we
34
For assistance, please visit http://shop.panasonic.com/support
Phonebook
To Next Page
Loading...
