Panasonic 2-LINE KX-TG9551 Series - Page 45

R Y
ou can program this setting using either the
base unit or one of the handsets.
Storing unwanted callers
You can store up to 250 phone numbers in the call
block list.
Important:
R We recommend storing 10 digits (including an
area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will be
blocked.
n From the caller list:
Handset
1 MCN
CID
2 MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
“Edit” a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the 10-digit format. And
then, press MSAVEN. Go to step 5.
3 MMENUN
4 MbN: “Save CID” a MSELECTN
5 MbN: “Call block” a MSELECTN
6 MbN: “Yes” a MSELECTN
7 Edit the phone number if necessary (24 digits
max.).
8 MSAVEN a MOFFN
Base unit
1 MC
IDN
2 MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the 10-digit format.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary (24 digits
max.).
7 MSAVEN a MEXITN
n By entering phone numbers:
Handset
1 MMENUN#217
2 MMENUN a MbN: “Add” a MSELECTN
3 E
nter the phone number (24 digits max.).
4 MSAVEN a MOFFN
Base unit
1 MM
ENUN#217 a MADDN
2 Enter the phone number (24 digits max.).
3 MSAVEN a MEXITN
Blocking incoming calls without phone number
Y
ou can reject a call when no phone number is
provided, such as a call just showing “Out of
area”.
Handset / Base unit
1 MM
ENUN#240
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When the unit receives a cellular call without a
phone number, the call may not be rejected.
Setting the first ring for the call block list
Handset / Base unit
I
f you do not want the first ring from a number on
the call block list to sound, turn the first ring setting
to “Off”. The default setting is “On”.
1 MMENUN#173
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Viewing/editing/erasing call block numbers
Handset
1 MM
ENUN#217
2 MbN: Select the desired entry.
R To exit, press MOFFN.
3 To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN a
MOFFN
For assistance, please visit http://shop.panasonic.com/support
45
Programming
KX-TG954x_955x_OI(en)_0507_ver432.pdf 45 2018/05/07 14:00:44