Using Caller ID service
I
mportant:
R This unit is Caller ID compatible. To use Caller
ID features, you must subscribe to a Caller ID
service. Contact your phone service provider for
details.
Caller ID features
Handset / Base unit
W
hen an outside call is being received, the caller
information is displayed.
Caller information for the last 50 callers is logged
in the caller list from the most recent call to the
oldest.
R If the unit cannot receive caller information, the
following is displayed:
– “Out of area”: The caller dials from an
area which does not provide a Caller ID
service.
– “Private caller”: The caller requests not
to send caller information.
– “Long distance”: The caller makes a long
distance call.
R If the unit is connected to a PBX system, caller
information may not be properly received.
Contact your PBX supplier.
Missed calls
Handset / Base unit
I
f a call is not answered, the unit treats it as a
missed call. The display shows “Missed call”.
Note:
R Even when there are unviewed missed calls,
“Missed call” disappears from the standby
display if the following operation is performed by
one of the units:
– A handset is replaced on the base unit or
charger.
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
Phonebook name display
W
hen caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is displayed and
logged in the caller list.
Talking Caller ID
Handset / Base unit
T
his feature lets you know who is calling without
looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your phone
service provider.
– turn this feature on (page 41).
When caller information is received, the handsets
and base unit announce the caller’s name or
phone number received from your phone service
provider following every ring.
The unit announces in English only.
R Name pronunciation may vary. This feature may
not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller’s name
is too long, the unit may not be able to display or
announce the entire name.
Phonebook name announcement
W
hen caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is announced.
Caller list
I
mportant:
R Make sure the unit’s date and time setting is
correct (page 16).
Viewing t
he caller list and calling back
n Using a cellular line
Handset
1 MCN
CID
2 Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3 To call back, press MCELLN.
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 20).
To exit, press MOFFN.
4 MbN: Select the desired cellular phone. a
MSELECTN
For assistance, please visit http://shop.panasonic.com/support
47
Caller ID Service
To Next Page
Loading...
