EasyManua.ls Logo

Panasonic 650EX - User Manual

Panasonic 650EX
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MATRIX SYSTEM650EX PRODUCT COMPONENTS
Matrix System650EX
Matrix Switcher
WJ-SX650
Card Cage
WJ-SX650U
SPECIFICATIONS (Expanded System)
Video Number of Inputs
1.0 V [p-p] / NTSC composite 75 / BNC Connector x Up to 512
Interface
With Multiplexed Vertical sync (VD2) and control data.
Logical Camera No. Range 1 ~ 99,999
Number of Loop 1.0 V [p-p] / NTSC composite 75 / 25pin D-sub connectors.
Through Outputs Active loop through.
Number of Outputs 1.0 V [p-p] / NTSC composite 75 / BNC Connector x Up to 64
Logical Monitor No. Range 1 ~ 9,999
Controller Number of Controllers 64 (WV-CU950 and ActiveX controller)
Recorder Number of Recorders
Up to 32 (WJ-HD300A Series, WJ-RT416) *Connection with the WJ-RT416 is a plan for future.
Alarm Alarm Source Total up to 1,024 consists of followings
Terminal inputs x 1,024 Camera alarm x 512 Video loss alarm x 512
Serial alarm x 1,024 (Total of terminal input and output is 1,024)
Supports one state input mode.
Number of Alarm Programs 1,024
Alarm Outputs Up to 256 (Terminals), Trigger: Active/ACK/RESET
Alarm Control Ack (Auto/Manual), Reset (Auto/Manual), All reset, Arm, Disarm
Alarm Action
Up to10 actions including Camera spot, Tour SEQ, Group SEQ and Text
Alarm Target Up to 64 targets, Up to 64 monitors in a target.
Multi-Alarm Mode SEQ/HOLD
Alarm Log Up to 30 days and 500KB x 99 files per day.
Alarm Schedule Possible by Timer Event
Functions Partitioning Controller-Area, Monitor, Camera view, Camera cont, G-SEQ,
Alarm, Alarm I/O, Recorder. Operator-Controller. Monitor-Camera.
Priority 0 ~ 65,534 for Operator, Controller, Alarm and Timer event
Sequence Tour Sequence; 128 patterns, 64 steps, Logical No. 1 ~ 9,999
Group Preset; 128 patterns with 64 monitors, Logical No. 1 ~ 9,999
Group Sequence; 128 patterns, 64 steps, Logical No. 1 ~ 9,999
Dwell Time; Up to 86,339 seconds
Timer Events
1,024 (Camera Spot, Tour SEQ, Group Preset, Group SEQ, Alarm, Mode change)
Area 64
Redundant CPU Supported
Setup Method Admin software (English)
Operator No. of Registration 512
Level Class setup 1 ~ 16
Priority 0 ~ 65,534
Operator Login/System 64
Administrator No. of Registration 128
Level 1 ~ 4
Camera Control
PTZ Up to 64 steps
(depending on the
Iris OPEN/CLOSE/RESET
camera model)
Focus FAR/NEAR/AUTO
Wiper ON (Keep pressing)
Defroster ON/OFF
Preset Positions Up to 255 Preset Positions
Setup Menu ON/OFF
Auto Mode Auto Pan, SEQ, Sort, Patrol
B/W Color/BW/AUTO1/AUTO2
AUX AUX 1/2 ON/OFF
Function Number 1 ~ 256
OSD Service Time Date Time: 12/24H, Date: 10 formats
Camera Title 28 alpha-numeric characters
Alarm Title 18 alpha-numeric characters
Status System, Video loss, Alarm
Customizable Characters 32
Log Alarm (100), Video loss (100)
Log Log by Admin Software Switching, Operator, Alarm, Video loss, Admin setup
Video Input Board
WJ-PB65C32
Video Output Board
WJ-PB65M16
Network Board
WJ-PB65E01
D-sub/BNC Video Cable
WJ-CA68
(0.5 m : 1.65 ft)
Expansion Cable Kit
WJ-CA65L20K
(2 m : 6.6 ft)
WJ-CA65L07K
(0.7 m : 2.3 ft)
Digital Disk Recorders
WJ-HD316A (16ch)
WJ-HD309A (9ch)
Central Processing Unit
WJ-MPU955A
Ethernet System Controller
with 3D-Joystick & Jog/Shuttle
WV-CU950
Upgrade Software
WJ-ASC960
• All TV pictures are simulated.
Weights and dimensions are approximate.
• Specifications are subject to change without notice.
These products may be subject to export control regulations.
DISTRIBUTED BY:
http://panasonic.net/security/
Printed in Japan (2P-554A)
Trademarks and registered trademarks
–Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Important
Safety Precaution: carefully read the operating instructions and installation manual before using this product.
–Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
Question and Answer IconNeed help?

Do you have a question about the Panasonic 650EX and is the answer not in the manual?

Panasonic 650EX Specifications

General IconGeneral
Channels2
Power Output33W (8 Ohms, 20Hz-20kHz, 0.5% THD)
Frequency Response20Hz - 20kHz
Total Harmonic Distortion0.5% (at rated output)
Input Sensitivity150mV (Phono), 180mV (Line)
Signal to Noise Ratio70dB (Phono), 90dB (Line)
Dimensions410 x 132 x 314mm
Weight7.3kg

Summary

Matrix System 650 EX Overview

Satellite System Capabilities

Key features for satellite system configuration and capabilities, including domain limits and operator classes.

Expanded System Functionality

Details basic, alarm, general, and OSD services for the expanded system configuration.

Software for System Management

Information on administration software and satellite configuration upgrade software.

Major System Functions

Sequencing Features for Monitoring

Three features for determining image sequence from multiple cameras, enhancing monitoring efficiency.

System Partitioning and Priority

Flexible system partitioning and priority settings for advanced operation management.

User Access Management

Management of up to 512 operators with individual IDs, passwords, and priority settings.

Timer Events for Operation

Automated activation of camera spot, tours, group presets, and alarms via programmed schedules.

Product Configuration and System Examples

Matrix Switcher and Components

Details on the WJ-SX650 matrix switcher, card cage, and central processing unit.

Expanded System Configuration Example

An illustration of a full matrix configuration for a 512-camera x 64-output system.

Satellite Configuration Example

Diagram showing satellite configuration with multiple domains connected via IP network.

Specifications and Product Components

Expanded System Specifications

Detailed technical specifications for video interface, controller, alarm, and operator functions.

Matrix System 650 EX Product Components

List and images of all hardware components and accessories for the Matrix System 650EX.

Related product manuals