For KX-UT113/KX-UT123:
3. Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the
illustration below.
For details about connecting the cables, see "Connections (Page 60)".
Note
• The cables can also be run from the bottom of the unit.
For KX-UT133/KX-UT136/KX-UT248:
40 mm (1
37
/
64
in)
or less
Ethernet cables
AC adaptor
Document Version 2011-10 Operating Instructions 65
Installation and Setup
To Next Page
Loading...
