Panasonic AAD03011 - Operating With the Operation Panel -2

Main display
[Continued from previous page, Example for rotating in reverse
direction at operating frequency 10Hz]
Changing
the rotation
direction
Press the MODE button.
r
Press the SET button.
(The main display will flicker.)
MODE
SET
F
䂥
Press the䂥(up) button.
(The main display will flicker.)
Press the SET button to set the data.
SET
0 00
Press the MODE button.
r
MODE
d
䋭 FL
䋭 rL
Run command
Stop command
Press the RUN button.
As the frequency is already set to
10Hz, the motor will start rotating in
the reverse direction and operate
at 10Hz.
RUN
1 0. 0
[Example to change to forward rotation during reverse rotation]
Changing
the rotation
direction
Press the MODE button.
r
Press the SET button.
(The main display will flicker.)
MODE
SET
F
䂯
Press the䂯(down) button.
(The main display will flicker.)
Press the SET button.
The motor will decelerate, and
will start forward rotation at 10Hz.
SET
Press the MODE button.
r
MODE
d
䋭 rL
䋭 FL
1 0. 0
0. 0
Reverse
Forward
1 0. 0
Press the STOP button.
The motor will start to decelerate
and will stop.
STOP
0 00
[Stopping operation]
27