Panasonic AG-7350 Series - Removal of the Audio Meter Unit; Removal of the Head Amp C.B.A; Removal of the MIC Jack Unit; Removal of the Power Connection C.B.A

2-2-8. Removal of the Audio Meter Unit
1. Unscrew the 6 screws (M) on the Audio Meter
Unit (Figure
012).
2. Lift the Audio Meter Unit.
[Front Panel Inside View)
6 Screws (M)
Audio Meter Unit
Figure 012
2-2-9. Removal of the Mic Jack Unit
1. Unscrew the 3 screws (N) on the M ic Jack Unit
(Figure
013).
2. Lift the Mic Jack Unit.
[Front Panel Inside View]
Mic
Jack
Unit
3
Screws (N)
Figure 013
2-2-10. Removal of the Head Amp C.B.A.
1. Unscrew the 2 screws (0) on the Head Amp C. B.A.
(Figure
014).
2. Pull out the Head Amp C.B.A.
[Top View]
Figure 014
2 Screws (0)
Head Amp
C. B.A.
2-2-11. Removal of the Power Unit
1. Unscrew the 3 screws (P) on the Power Unit
(Figure
015).
2. Pull out the Power Unit.
[Top View]
Power Unit
3
Screws (P)
Figure 015
2-2-12. Removal of the Power Connection C.B.A.
1. Unscrew the 2 screws (0) on the Rear Panel
(Figure 016).
[Rear View]
2 Screws (Q)
Figure 016
2. Unscrew the 4 screws (R) on the Power
Connection C.B.A.
(Figure 017).
3. Carefully lift the Power Connection C.B.A.
[Top View]
4 Screws (R)
Power Connection C.B.A.
Figure 017
2-5
>
_,
£D
:::iE
w
en
en
<C
en
c