Panasonic AG-AC160 - Remote Control Operation; Battery Recharging Procedure

24
Remote control
When using the remote control, set the [IR REMOTE] on the [OTHER FUNCTIONS] menu to [ON]. The
factory setting is set to [OFF]. (Page 97 of Vol.2)
Take note that the following buttons are for
functionsthatcannotbeexecutedonthis
camera.
•
button
•
PHOTO SHOT button
ZOOM
START/
STOP
PHOTO
SHOT
EXT
DISPLAY
DATE/
TIME
VOL
PLAY
STOPSKIP SKIP
MENU
ENTER
PAUSE
SEARCH
STILL ADV STILL ADV
SEARCH
3
4
6
8
1
2
5
7
8
9
10
11
6
10
12
Remote control usable range (Page 29)
1 EXT DISPLAY button
(Page 66 of Vol.2)
2 DATE/TIME button (Page 66 of Vol.2)
3 START/STOP button
Samefunctionasthe<START/STOP>button
on the camera.
4 ZOOM/VOL button
(Page 66 of Vol.2)
5 PLAY button (Page 54 of Vol.2)
6 SEARCH button (Page 54 of Vol.2, Page 65 of
Vol.2)
7 PAUSE button (Page 54 of Vol.2)
8 STILL ADV button (Page 66 of Vol.2)
9 STOP button (Page 54 of Vol.2)
10 SKIP button (Page 54 of Vol.2, Page 65 of Vol.2)
11 OPERATION buttons
Same function as the OPERATION lever on the
camera.
12 MENU button
Same function as the MENU button on the
camera.
Preparation
Recharging
1
Connect the power cord to the AC adaptor.
•
Disconnect the DC cord. The battery cannot
be charged if the DC cord is connected. (For
AG-AC160P/AG-AC160ENonly)
(1)
(2)
Insert until fully in place.
DC cord
Example: AG-AC160P
2
Insert the battery.
Charging lamp <CHARGE>
Align the battery with the mark
and insert fully.
The battery is not charged at the time of purchase. Charge the battery before use.
Itisrecommendedthatyoukeeponeextrabatteryasaspare.
Recharging the battery