Panasonic AG-AC160 - Powering Camera On;Off; Switching Recording Modes

30
Turning the camera ON/OFF
Turning on the power:
TurnthePOWER/MODEswitchuptothe<ON>
position while pressing the lock release button.
The mode lamp <CAMERA> lights up in red and
the camera goes to recording standby status
(<CAMERA> mode).
•
IfthePOWER/MODEswitchisturneduptothe
<MODE> position, the mode lamp <PB> will light
up in green and the camera goes to <PB> mode.
(Page 54 of Vol.2)
•
Every time the switch is turned to the <MODE>
position, the mode will change between
<CAMERA> mode and <PB> mode.
Turning off the power:
TurnthePOWER/MODEswitchuptothe<OFF>
position while pressing the lock release button.
Themodelamp<CAMERA>/<PB>goesoff.
Lock release button
POWER/MODE switch
Mode lamp
Switching to AVCHD mode/DV mode
1
Turn the camera’s POWER/MODE switch <ON>. (Page 30)
2
Press the <MENU> button.
3
Set [AVCHD] or [DV] from the [HD/SD MODE] items in the setup menu
[RECORDING SETUP] screen.
4
When the [TURN POWER OFF] message is displayed, turn the power
OFF and then ON again.
When the power is turned on again, the mode changes.
•
ForinstructionsonhowtoturnthecameraON/OFF,refertopage30.
•
When you switch to AVCHD mode, <HD> indicator will light up in blue.
•
When you switch to DV mode, <HD> indicator will turn off.
<HD> indicator