Panasonic AG-AC160 - EMC Notice for Users; Peripheral Equipment and Cables; Performance Level and Interference Mitigation

7
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS
1. Applicable standards and operating environment
The apparatus is compliant with:
• standards EN55103-1 and EN55103-2 2009, and
• electromagnetic environments E1, E2, E3 and E4.
2. Pre-requisite conditions to achieving compliance with the above standards
<1> Peripheral equipment to be connected to the apparatus and special connecting cables
• Thepurchaser/userisurgedtouseonlyequipmentwhichhasbeenrecommendedbyusas
peripheral equipment to be connected to the apparatus.
• Thepurchaser/userisurgedtouseonlytheconnectingcablesdescribedbelow.
<2>
For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.
• Video signal connecting cables
Usedouble-shieldedcoaxialcables,whicharedesignedfor75-ohmtypehigh-frequencyap-
plications, for SDI (Serial Digital Interface).
Coaxialcables,whicharedesignedfor75-ohmtypehigh-frequencyapplications,arerecom-
mended for analog video signals.
• Audio signal connecting cables
IfyourapparatussupportsAES/EBUserialdigitalaudiosignals,usecablesdesignedforAES/EBU.
Use shielded cables, which provide quality performance for high-frequency transmission ap-
plications, for analog audio signals.
• Other connecting cables (IEEE1394, USB)
Use double-shielded cables, which provide quality performance for high-frequency applica-
tions, as connecting cables.
• When connecting to the DVI signal terminal, use a cable with a ferrite core.
• If your apparatus is supplied with ferrite core(s), they must be attached on cable(s) following
instructions in this manual.
3. Performance level
The performance level of the apparatus is equivalent to or better than the performance level
required by these standards.
However, the apparatus may be adversely affected by interference if it is being used in an EMC
environment, such as an area where strong electromagnetic fields are generated (by the presence
ofsignaltransmissiontowers,cellularphones,etc.).Inordertominimizetheadverseeffectsofthe
interference on the apparatus in cases like this, it is recommended that the following steps be taken
with the apparatus being affected and with its operating environment:
1. Place the apparatus at a distance from the source of the interference.
2. Change the direction of the apparatus.
3. Change the connection method used for the apparatus.
4.
Connect the apparatus to another power outlet where the power is not shared by any other appliances.
For AG-AC160EJ/AG-AC160EN Only
For AG-AC160EN Only
Caution for AC Mains Lead
AC adaptor (Battery charger)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable, Type C and Type BF.
Appropriate mains cable must be used in each local area, since the other type of mains cable is
not suitable.
TYPE C TYPE BF
indicates safety information.