Panasonic AG-AC30 - Disp Setup

22
DISP SETUP
Menu item
Description
Value (Factory default setting
underlined)
ZEBRA DETECT1
Set the zebra pattern
(right downward).
50% - 80% - 105%
ZEBRA DETECT2
Set the zebra pattern
(right upward).
50% - 100% - 105%
MARKER
Display the spot meter marker.
ON / OFF
GUIDE LINES
Select and show the guide line
pattern.
/ / / OFF
SAFETY ZONE
Select and show the safety zone
marker.
16:9 90% / 4:3 / 14:9 / 1.85:1 / 2:1 /
2.35:1 / 2.39:1 / OFF
*Following items can be selected
when SA 480i or 576i mode is
selected and “SIDE CROP” is
selected for the ASPECT CONV
menu item.
 4:3 90% / 4:3 / OFF
CENTER MARKER
Show the center marker.
ON / OFF
REC COUNTER
Set the counting method of
record counter.
TOTAL / SCENE
VIDEO OUT OSD
Show the EVF characters on an
external video monitor.
ON / OFF
DATE/TIME
Set the display format of date
and time.
OFF / TIME / DATE / DATE&TIME
DATE FORMAT
Set the display format of
calendar.
Y/M/D, M/D/Y, D/M/Y
LEVEL GAUGE
Show a level gauge to check the
pitch and roll levels.
ON / OFF
HISTOGRAM
Display distribution of brightness
of the image for a quick check of
exposure. The histogram chart
consists of “brightness” on the
horizontal axis, and “frequency
of appearance” on the vertical
axis.
ON / OFF
AUDIO LEVEL
METER
Show audio level meter.
ON / OFF
LENS STATUS
Show following item information.
Zoom, OIS, Iris, Gain, focus
position, white balance, shutter
speed, horizontal balance
compensation, built-in LED light.
ON / OFF
CARD&BATTERY
Show remaining time of SD card
and battery.
ON / OFF
3. MENU settings