Value (Factory default setting underlined)
Time to be ready to start
recording after power ON
can be shorten to approx. 1
sec when set to ON.
Zoom position returns to x1
when switched ON with it.
Set the beep alert volume,
which occurs when touching
the screen or
starting/stopping recording.
Turn ON/OFF the economy
mode, which automatically
turns power OFF when no
operation is detected for
five minutes while the
camera is battery-powered.
ON / OFF
*It does not function under the following
conditions.
-PRE-REC is activated
-While in USB connection mode
Turn ON/OFF the economy
mode, which automatically
turns power OFF when no
operation is detected for 15
minutes while AC-powered.
ON / OFF
*It does not function under the following
conditions.
-PRE-REC is activated
-While in USB connection mode
Enable/disable the USB
connection mode
HOST / DEVICE
HOST: When connect to external storages.
DEVICE: When connect to PC/Mac.
Restore the product to
factory settings.
Return the clip number to
“0001” when MOV/MP4 files
or still pictures are recorded
next time.
Show license information on
a PC connected via USB
interface.
License information can be viewed on the
PC with “LICENSE.txt” generated from the
camera.
Value
(Factory default setting underlined)
Show the current firmware
version.
Executes the firmware
update.
Show the following operation
hours and times (cumulative)