37
6-1. Connecting to PC/Mac
Recorded clips can be transferred rapidly between PC/Mac over USB2.0 interface.
How to connect
1. Turn ON the power of the AG-AC30 camera.
2. Set MENU > OTHER FUNCTIONS > USB MODE SELECT: DEVICE
3. Turn OFF the power of the camera and connect to the PC/Mac with a USB2.0 cable.
4. Turn ON the power and tap “PC” on the touch screen to switch to the PC connection mode.
* The built-in LCD panel will turn OFF for 5 seconds straight after connection is established
when battery powered (the LCD panel works again when tapped).
* Data cannot be written from PC/Mac to the mounted SD card.
6-2. File structure of SD memory card
* Several kind of different files are stored under PRIVATE folder for AVCHD clips. Always copy the
PRIVATE folder as a file set. Copying *.MTS files only may cause clip to be unplayable.
Files stored:
a) Still pictures captured with AG-AC30
b) Video clips in MOV format
c) Video clips in MP4 format
d) Still pictures generated from video clips
e) Thumbnails (AVCHD clips)
f) AVCHD video clips (.MTS format)
g) For file management only
To Next Page
Loading...
