Panasonic AG-AC30 - [H;PHONE MODE]; [VOLUME]

- 129 -
Switches the output setting of time code information when this unit is connected to another device
(HDMI-SDI converter, etc.) with an HDMI cable.
≥ When performing remote recording with the [AUTO REC] USER button function, select [ON].
(l 78)
≥ (In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode. (l 85)
Select the sound heard through the headphone terminal and AUDIO OUT terminal.
≥ When an HDMI cable is connected to this unit, even if you select [LIVE], sound will be output
according to [RECORDING].
When [ON] is selected, you can adjust the headphone volume in Recording Mode with the jog dial.
(l 84)
Selects the test tone output when color bars are displayed. (l 80)
This sets how to turn on/off the LCD monitor and viewfinder. (l 30)
[HDMI TC OUTPUT]
[ON]/[OFF]
[H/PHONE MODE]
[LIVE]: The sound which has been input from the microphone is output as is.
This setting is selected when delays in the sound are annoying.
[RECORDING]: The sound in the status which is to be recorded (the sound synchronized
with the images) is output.
[VOLUME]
[ON]/[OFF]
[TEST TONE]
[OFF]: Does not output a test tone.
[LEVEL 1]: Outputs a high volume test tone.
[LEVEL 2]: Outputs a low volume test tone.
[LCD/EVF OUTPUT]
[LCD]/[EVF]
R68S3_PJPB.book 129 ページ ２０１６年９月２日 金曜日 午前１０時４３分