- 137 -
You can view the software information (License) on a PC connected to this unit with a USB 2.0
cable.
≥ Set [USB MODE SELECT] to [DEVICE]. (l 136)
1 Touch [SOFTWARE INFO].
2 Connect this unit to a PC. (l 103)
≥ A message will be displayed when the connection is complete. On the PC, confirm
[LICENSE.TXT].
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
You can select the language on the screen display and the menu screen.
Maintenance
The version of the firmware of this unit is displayed.
The firmware of this unit is updated. (l 153)
It is also possible to downgrade the firmware to older versions. Settings are automatically reset to
the default when the firmware is downgraded.
This displays the operation time of this unit, how many times the zoom lever has been operated,
how many times the zoom motor has worked and how many times the jog dial has been pressed.
[SOFTWARE INFO]
[LANGUAGE]
: [MAINTENANCE] # desired setting
[VERSION]
[UPDATE]
[HOUR METER]
MENU
R68S3_PJPB.book 137 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
