- 150 -
Indication
Problem Check points
Function display
(Remaining Display,
Counter Display, etc.) is
not displayed.
≥ [CARD & BATTERY] or [OTHER DISPLAY] of the
[DISP SETUP] is [OFF]. (l 132)
≥ Touch the icon to switch the counter display. (l 62)
Recording
Problem Check points
The unit arbitrarily stops
recording.
≥ Use an SD card that can be used for motion picture recording.
(l 27)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card. (l 38)
Auto Focus function does
not work.
≥ If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l 43, 46)
Audio is not recorded. ≥ Super Slow Recording or Interval Recording is enabled.
(l 76, 125)
≥ is displayed and audio is not recorded during Super
Slow Recording.
≥ Audio is not recorded for Interval Recording.
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
≥ Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ Set as below.
j Record in Auto Shutter Mode.
j Adjust the shutter speed to 1/50, 1/60 or 1/100.
COUNT
R68S3_PJPB.book 150 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
