- 82 -
You can select and set menu items (l 36), etc. using the jog dial.
1 Rotate the jog dial on the menu screen,
etc., to move the cursor.
≥ The selected item will be displayed in yellow.
2 Push the jog dial to set.
Menu operations for setting a value
When a menu that lets you set a value is displayed, select the value display before adjusting the
setting.
≥ You cannot select / / / with the jog dial when a screen that lets you adjust a value is
displayed.
(Example: When adjusting the brightness for [LCD SET])
1 Rotate the jog dial to move the cursor to the
value display A.
≥ Push the jog dial to select the value display.
2 Rotate the jog dial to adjust the setting.
≥ Pushing the jog dial will set the value you have selected.
≥ You can adjust the setting faster by rotating the jog dial while
pushing and holding it.
≥ The jog dial also allows you to select/set operation icons, thumbnails, etc.
≥ Parts that are finger-touch sensitive can be operated with the jog dial. (Excluding some functions)
Recording
Using of jog dial
Selecting/setting items
SEL/
PUSH
SET
R68S3_PJPB.book 82 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
