- 11 -
∫ About the external stereo
microphone
External stereo microphone
1 Microphone condenser
2 Cable Holder
3 Lock ring
4 Mini plug and Cable
5 Shoe
6 Plug section
Attaching the external stereo
microphone to the unit
1 Attach the microphone to the
accessory shoe.
1 Loosen the lock ring.
2 Attach the microphone.
3 Firmly tighten the lock ring.
≥ Do not apply excessive force on the lock ring.
≥ Make sure that the microphone is securely
attached.
2 Connect the plug to the external
microphone terminal.
≥ Check that the unit is turned off. Connecting
or removing the microphone while the unit is
turned on may cause malfunction.
≥ You can fasten the excess cable by tucking it
into the cable holder.
≥ When removing the microphone, disconnect
the plug, and then remove the microphone in
reverse order of attaching.
≥ Hold the lock ring when mounting or
removing the microphone.
1
2
3
4
6
5
To Next Page
Loading...
