E-15
Fixing the Connector Cover
Fix the connector cover as explained below when
this unit is used with the power cables connected.
1 Fix the included cable strap onto the power
supply cables.
2 After connecting the DC IN 24 V connector
cover of this unit with the connector cover of
the power supply cables, fix it to the
connector of the power supply cables using
the cable strap.
AG-CA300G(VQT2H44)_EGFISJ.book 15 ページ ２００９年１０月１９日 月曜日 午前１１時４７分
To Next Page
Loading...
