Panasonic AG-CA300G - Fixing the Cables

E-16
ENGLISH
Fixing the Cables
Fix the cables connected to this unit as explained
below. If not fixed correctly, this unit may fall off
when excessive load is applied to the cable.
1 Run the power supply / VF / BS IN / BS OUT
cables through the cable clamper.
2 Fix the power supply / VF / BS IN / BS OUT
cables to the handle of the camera recorder
using the included cable strap.
2
1
AG-CA300G(VQT2H44)_EGFISJ.book 16 ページ ２００９年１０月１９日 月曜日 午前１１時４７分