E-17
Mounting of the Battery Plate
When using a battery, mount the included battery plate to the rear panel of the unit.
1 Remove the 2 screws and remove the rear
panel cover. Also remove the 4 screws from
the main body.
2 Connect the battery connector of the unit to
the connector on the included battery plate.
3 Mount the battery plate securely using the 4
screws removed from the main body in
1,
making sure there is no slack.
<Note>
The battery may fall off if the screws are
loose.
4 Cover for the rear panel removed in 1 can be
mounted on the front panel so it will not get
lost. Mount the cover for the rear panel
removed in
1 as shown in the illustration
using the 2 screws.
AG-CA300G(VQT2H44)_EGFISJ.book 17 ページ ２００９年１０月１９日 月曜日 午前１１時４７分
To Next Page
Loading...
