Panasonic AG-CA300G - Mounting and Connection of the BT-LH80 W;WU

E-19
Mounting and Connection of the BT-LH80W/WU
Mount the unit to a BT-LH80W/WU using the following procedure:
1 Mount the BT-LH80W/WU on the handle unit of the camera recorder as shown.
2 Connect the VF OUT connector of the unit with the BT-LH80W/WU using the included VF cable.
Connect the D-Sub connector to the GPI connector of the BT-LH80W/WU. Connect the BNC
connector (black) to the Y input connector, the BNC connector (blue) to the P
B input connector, and
the BNC connector (red) to the P
R input connector.
* Use a mount that can withstand the weight of the BT-LH80W/WU (1.5 kg).
Y
GPI
P
R
P
B
Mount *
(commercially available)
BNC connector
D-Sub connector
GPI control
VF cable
(included)
BNC connector
D-Sub connector
BT-LH80W/WU
(Connect to the VF OUT connector.)
(Black)
(Red)
(Blue)
AG-CA300G(VQT2H44)_EGFISJ.book 19 ページ ２００９年１０月１９日 月曜日 午前１１時４７分