No.
Item Ref. Illustration Procedure
2-9
3
3
Pinch roller arm assembly
<Disassembly>
Mode motor assembly:
1)Remove the screw (S2) and remove the mode
motor assembly.
Worm wheel 2 & gears 1 and 2:
1)Lift the worm wheel 2 upward to remove.
2)Lift the gear 1 upward to remove.
3)Lift the gear 2 upward to remove.
<Assembly>
1)Reverse the disassembly procedure.
<Disassembly>
1)While pushing the hook on the pinch plate, lift the
pinch roller arm assembly upward to remove.
<Assembly>
1)Reverse the disassembly procedure.
Fig. 2.6.4
Fig. 2.6.3
Remove while
pushing this part.
Pinch plate
Pinch roller
arm assembly
Please pay attention
not to damage these
roller part.
(
S2
)
Gear 1
Gear 2
Worm wheel 2
Mode motor
assembly
Note:
Worm wheel 2 and gears 1 and 2 do not re-
quire the mechanism phase adjustment.
4
4
Mode motor assembly/
5
Worm wheel 2/
6
Gear 1/
7
Gear 2
To Next Page
Loading...
