Panasonic AG-DV2500P - Page 111

No. Item Ref. Illustration Procedure
2-15
12 Switch lever <Disassembly>
1)Unhook the spring (P5).
2)Slide the switch lever in the direction of the arrow
and then lift it upward to remove.
<Assembly>
1)Reverse the disassembly procedure.
<Disassembly>
1) Remove the FFC from the mechanism circuit board
CN124.
2) Remove the three screws (S2) and remove the reel
motor.
<Assembly>
1)Reverse the disassembly procedure.
2)Tighten the three screws (S2) in the order of
1
-
3
.
13
⁄
Reel motor
Fig. 2.6.12
Fig. 2.6.13
(
P5
)
Switch lever
(
S2
)
(
S2
)
(
S2
)
FFC cable
Reel motor
2
1
3
Note:
Be sure to have the FFC cable installed on the
reel motor side before attaching.