No.
Item Ref. Illustration Procedure
2-19
19 Supply reel lock/ Take-up reel lock <Disassembly>
Supply reel lock:
1)Unhook the spring (P6) and lift the supply reel lock
upward to remove.
Take-up reel lock:
1)Unhook the spring (P6) and lift the take-up reel lock
upward to remove.
<Assembly>
1)Reverse the disassembly procedure.
<Disassembly>
Pinch cam gear:
1)Lift the pinch cam gear upward to remove.
Main cam:
1)Remove the screw (S2) and remove the main cam.
<Assembly>
1)Reverse the disassembly procedure.
2)Attach the main cam and pinch cam gear so that
their phase relationship is as shown in the figure.
20
¢
Pinch cam gear/
∞
Main cam
Fig. 2.6.19
Fig. 2.6.20 (1)
(
P6
)
(
P6
)
Take-up side spring (P6)
hook position
Supply side spring (P6)
hook position
Supply reel lock
Take-up reel lock
(
S2
)
Main cam
Pinch cam gear
Rear Side Cam Slot
Multemp SH-P
See
M3
in section 5.
Fig. 2.6.20 (2)
To Next Page
Loading...
