No.
Item Ref. Illustration Procedure
2-21
23 Leaf plate <Disassembly>
1)Push the supply side of the leaf plate in the direc-
tion of arrow 1 to release the lock.
2)Push the take-up side of the leaf plate in the direc-
tion of arrow 2 to release the lock. Now the leaf
plate can be removed.
<Assembly>
1)Reverse the disassembly procedure.
<Disassembly>
Supply reel plate:
1)Slide the reel change plate toward the mini-cas-
sette position. (Stop sliding before it is locked com-
pletely.) (See Fig. 2.6.6 (2))
2)Lift the right side of the supply reel plate (gear side)
and turn it slightly to remove.
Take-up reel plate:
1)Lift the left side of the take-up reel plate and turn it
slightly to remove.
<Assembly>
1)Reverse the disassembly procedure.
24
q
Supply reel plate/
w
Tale-up reel plate
Fig. 2.6.23
Fig. 2.6.24 (1)
1
2
Leaf plate
Multemp SH-P
See
M3
in section 5.
SUP real plate
TU real plate
SUP reel plate
TU reel plate
Note:
Be careful not to deform the leaf plate during
removing or attaching.
Notes:
Take-up reel plate attaching position
Attach the take-up reel plate so that the gear cogs
on its inner right side are meshed with those on
the left end of the reel plate drive gear.
Supply reel plate attaching position
Attach the supply reel plate so that the gear cogs
on its inner right side are meshed with those on
the left end of the supply reel plate.
Fig. 2.6.24 (2)
To Next Page
Loading...
