Panasonic AG-DV2500P - Page 162

4-11
Pin No. Port Name Reference I/O Description
195 — 203 ND OPEN - Not used
204 VSS D_GND - GND for digital
205 PD0/TM10IO OPEN O Not used
206 PC1/SY0OT1 OPEN - Not used
207 VDD2 AL_3VSYS I Power for digital
208 PC6/SY1OT2/SBT8 OPEN - Not used
209 OSCO O 40MHz
210 FRQS VTR_TAUX I For rewrite
211 PK7/TM37IO MONI_CHG O Interface with P/R
212 CKSEL VTR_TTxD I For rewrite
213 MMOD1 VTR_TCK I For rewrite
214 — 222 ND OPEN - Not used
223 NC (VSS) D_GND - GND for digital
224 PE1/TM20IOB GND (10k) O Not used
225 PC7/SY1OT3 OPEN - Not used
226 PD3/TM13IO OPEN O Not used
227 PD2/TM12IO OPEN O Not used
228 MMOD0 VTR_TRXD I For rewrite
229 PJ1/EXMOD1 VTR_TAUX3 I For rewrite
230 PK5/TM35IO REC_H O Interface with P/R
231 VDDH AL_3VSYS I Power for digital
232 PVSS A_GND I GND for analog
233 — 241 ND OPEN - Not used
242 VDD VOUT_25 I Power for digital
243 PE7/TM23IOB GND (10k) O Not used
244 PD1/TM11IO OPEN O Not used
245 PE3/TM21IOB FFREW_H O Not used
246 PD5/TM15IO OPEN O Not used
247 PVDD AL_3VSYS I Power for analog
248 PP7/ADM15/A15 ADM15 I/O Interface with IC103
249 PK1/TM31IO OPEN O Not used
250 RST VTR_RESET I For rewrite
251 — 261 ND OPEN - Not used
262 PE4/TM22IOA GND (10k) O Not used
263 PD4/TM14IO OPEN O Not used
264 PE5/TM22IOB GND (10k) O Not used
265 VDD2 AL_3VSYS I Power for digital
266 PP5/ADM13/A13 ADM13 I/O Interface with IC103
267 PP3/ADM11/A11 ADM11 I/O Interface with IC103
268 PP4/ADM12/A12 ADM12 I/O Interface with IC103
269 VSS D_GND - GND for digital
270 VSS D_GND - GND for digital
271 ND OPEN - Not used
272 VDD VOUT_25 I Power for digital
273 VSS D_GND - GND for digital
274 P70/AN24 GND (10k) - Not used
275 PI6/AN22 GND (10k) - Not used
276 PI0/AN16 GND (10k) - Not used
277 PH0/AN8 THERM_MSD I Temperature sensor
278 PG0/AN0 START_SENSOR I START_SENSOR