Panasonic AG-DV2500P - Page 163

4-12
Pin No. Port Name Reference I/O Description
279 ND OPEN - Not used
280 TRST VSS (10k) - Not used
281 PF0/TM24IOA OPEN O Not used
282 PE2/TM21IOA DRUM_FG O DRUM_FG
283 PE0/TM20IOA GND (10k) O Not used
284 PF1/TM24IOB OPEN O Not used
285 PP1/ADM9/A9 ADM9 I/O Interface with 3.5LSI
286 PJ0/EXMOD0 GND (10k) I Memory mode selection
287 PO4/ADM4/A4 ADM4 I/O Interface with IC103
288 PO7/ADM7/A7 ADM7 I/O Interface with IC103
289 PO1/ADM1/A1 ADM1 I/O Interface with IC103
290 PN5/AS DALE O Interface with IC103
291 PN4/DK DV_WAIT I Interface with IC103
292 PM4/CS4 OPEN O Not used
293 VDDB AL_3VSYS I Power for digital
294 PI4/AN20 GND (10k) - Not used
295 PI1/AN17 GND (10k) - Not used
296 PH1/AN9 REEL_CURENT I Reel motor current
297 PG1/AN1 END_SENSOR I E_SENSOR
298 VREFH AL_3VSYS (for analog) I A/D GND (H)
299 VDD VOUT_25 I Power for digital
300 TMS VDD2 (10k) - Not used
301 PE6/TM23IOA GND (10k) O Not used
302 PF2/TM25IOA OPEN O Not used
303 PF3/TM25IOB GND (10k) O Not used
304 PP0/ADM8/A8 ADM8 I/O Interface with IC103
305 PP6/ADM14/A14 ADM14 I/O Interface with IC103
306 PP2/ADM10/A10 ADM10 I/O Interface with IC103
307 PN3/RE DRE O Interface with IC103
308 PN1/WE1/SDQM1 OPEN O Not used
309 PM2/CS2 DV_CS O Interface with IC103
310 PM5/RWSEL RWSEL O Interface with IC103
311 PM0/CS0 OPEN O Not used
312 PI2/AN18 GND (10k) - Not used
313 PH6/AN14 EJECT_MSD - EJECT brings up
314 PH7/AN15 GND (10k) - Not used
315 PH4/AN12 GND (10k) - Not used
316 PH2/AN10 REEL_ECR I Reference value for reel torque control
317 PG4/AN4 MIC_2 I AD for MIC IDBOARD detection
318 PG2/AN2 DEW_SENSOR I DEW_SENSOR
319 VREFL A_GND I A/D GND (L)
320 PV1/SBOA DAC_DATA O D/A control
321 TCK VDD2 (10k) - Not used
322 TDI VDD2 (10k) - Not used
323 ND OPEN - Not used
324 ND OPEN - Not used
325 VDDB AL_3VSYS I Power for digital
326 PO2/ADM2/A2 ADM2 I/O Interface with IC103
327 PO5/ADM5/A5 ADM5 I/O Interface with IC103
328 VDD VOUT_25 I Power for digital