Panasonic AG-HMC150P/AN - LCD Correction; EVF Correction

INF-12
4-2-3. LCD Correction
LCD OFFSET
1. Tilt the OPERATION lever in the ▲▼ direction to select the “LCD OFFSET”, and press the OPERATION
lever (or tilt lever in ► direction)
2. Tilt the OPERATION lever in the ▲▼ direction to select the correction level, and press the OPERATION lever
to value is fixed.
4-2-4. EVF Correction
EVF OFFSET
1. Tilt the OPERATION lever in the ▲▼ direction to select the “EVF OFFSET”, and press the OPERATION
lever (or tilt lever in ► direction)
2. Tilt the OPERATION lever in the ▲▼ direction to select the correction level, and press the OPERATION lever
to value is fixed.
R signal output to LCD is corrected.
1: Correction level 1
2: Correction level 2
DIAGNOSTICS 2/2
LCD OFFSET
OFF
EVF OFFSET
1
CAM DEBUG MODE
2
DARK MODE
SETUP ENTER EXIT
MENU
DIAGNOSTICS 2/2
LCD OFFSET
EVF OFFSET
OFF
CAM DEBUG MODE
1
DARK MODE
2
SETUP ENTER EXIT
MENU
R signal output to EVF is corrected.
1: Correction level 1
2: Correction level 2
DIAGNOSTICS 2/2
LCD OFFSET
OFF
EVF OFFSET
OFF
CAM DEBUG MODE
0
DARK MODE
ON
SETUP ENTER EXIT
MENU
DIAGNOSTICS 2/2
LCD OFFSET
OFF
EVF OFFSET
OFF
CAM DEBUG MODE
0
DARK MODE
ON
SETUP ENTER EXIT
MENU