INF-16
5-3. Setup of PC EVR software
1. Copy all files of the PC EVR software (VVS0070) to the PC.
2. Supply power to the Camera-Recorder and turn power ON.
3. This camera recorder is set to “CAM” mode.
4. Start up the PC EVR software by double-clicking “VVS0070.exe”. The following screen will appear.
NOTE: VVS0070 corresponds to AG-HVX200/A series, AG-HPX500 series and AG-HPG10. The model can be
selected on the following screen.
5. Select the “CAM(C
)” or “SYSCON(S)” according to the purpose and click “OK” button. The following screen
will appear and when communication between the PC and the Camera-Recorder has been succeeded, blue is
displayed to the status lamp.
6. The communication status between the PC and the Camera-Recorder can be confirmed with the status lamp
as following color.
Not Connected : black
Connected : blue
Reading : green
Writing : red
SYSCON section screen
STATUS LAMP
To Next Page
Loading...
